How to Root Xiaomi Poco M2 Reloaded

By /

Rooting your Xiaomi Poco M2 Reloaded can provide you with a range of benefits, including the ability to customize your device and access features that are otherwise restricted. However, it is crucial to proceed with caution, as rooting can also void your warranty and potentially lead to security risks if not done properly. In this article, we will guide you through the process of rooting your Xiaomi Poco M2 Reloaded effectively and safely.

Understanding Rooting and its Benefits

Rooting is the process of gaining privileged control, often referred to as “root access,” over the Android operating system. By rooting your Xiaomi Poco M2 Reloaded, you can overcome limitations imposed by the manufacturer and the carrier, allowing you to install custom ROMs, access system files, and use apps that require root access.

Here are some key benefits of rooting your Xiaomi Poco M2 Reloaded:

  • Customization: Rooting enables you to customize your device’s appearance, behavior, and performance. You can install custom ROMs, which are modified versions of the Android operating system, to personalize your device’s user interface and gain additional features.
  • Performance Optimization: Rooting allows you to optimize your device’s performance by removing bloatware, which are pre-installed apps that often consume system resources. You can also use apps that optimize CPU and RAM usage, resulting in a smoother and faster user experience.
  • App Compatibility: Some apps require root access to unlock their full potential. By rooting your Xiaomi Poco M2 Reloaded, you can use these apps and access features that are otherwise unavailable.
  • Backup and Restore: Rooting enables you to perform full system backups, including app data and settings. This allows you to restore your device to a previous state in case of any issues or data loss.

Before You Begin: Important Considerations

Before you proceed with rooting your Xiaomi Poco M2 Reloaded, it is essential to consider the following points:

  • Warranty Void: Rooting your device typically voids the manufacturer’s warranty. If your device is still under warranty and you encounter any hardware or software issues, the manufacturer may refuse to provide support or repair services.
  • Security Risks: Rooting your device can potentially expose it to security risks. When you gain root access, apps with malicious intent can also gain access to sensitive files and data. Therefore, it is crucial to exercise caution and only install apps from trusted sources.
  • Data Loss: Rooting your Xiaomi Poco M2 Reloaded involves modifying system files, which can result in data loss or even render your device unusable if not done correctly. It is highly recommended to backup all important data before proceeding.
  • Compatibility: Ensure that the rooting method you choose is compatible with the Xiaomi Poco M2 Reloaded model. Using incorrect methods can lead to bricking, where your device becomes permanently unresponsive.

Step-by-Step Guide to Root Xiaomi Poco M2 Reloaded

Now that you understand the benefits and considerations of rooting your Xiaomi Poco M2 Reloaded, let’s dive into the step-by-step process:

Step 1: Enable Developer Options and USB Debugging

The first step is to enable Developer Options on your Xiaomi Poco M2 Reloaded. Follow these steps:

  1. Open the Settings app on your device.
  2. Scroll down and tap on “About phone.”
  3. Locate the “MIUI Version” entry and tap on it seven times. You will see a message confirming that you are now a developer.
  4. Go back to the main settings screen and tap on “Additional settings.”
  5. Scroll down and tap on “Developer options.”
  6. Toggle the “Developer options” switch to enable it.
  7. Scroll down and enable “USB Debugging.”

Step 2: Unlock Bootloader

Before you can root your Xiaomi Poco M2 Reloaded, you need to unlock the bootloader. This step wipes all data on your device, so ensure that you have backed up everything important. Follow these steps:

  1. Go to the Xiaomi Mi Unlock Tool website on your computer and download the tool.
  2. Extract the downloaded ZIP file to a folder on your computer.
  3. On your Xiaomi Poco M2 Reloaded, open the Settings app.
  4. Scroll down and tap on “Mi Account.”
  5. Sign in with your Mi Account or create a new one if you don’t have an account.
  6. After signing in, go to “Mi Unlock status” and tap on “Add account and device.”
  7. Follow the on-screen instructions to bind your Mi Account to the device.
  8. On your computer, launch the Mi Unlock Tool and sign in with the same Mi Account.
  9. Connect your Xiaomi Poco M2 Reloaded to the computer using a USB cable.
  10. Put your device in Fastboot mode by turning it off, then pressing and holding the Volume Down and Power buttons simultaneously.
  11. Once in Fastboot mode, the Mi Unlock Tool should recognize your device. Click on “Unlock” to begin the process.
  12. Wait for the tool to unlock the bootloader. This may take a few minutes.
  13. Once the process is complete, your Xiaomi Poco M2 Reloaded will reboot with an unlocked bootloader.

Step 3: Install TWRP Custom Recovery

TWRP (Team Win Recovery Project) is a custom recovery that allows you to install custom ROMs and perform various system-level operations. Follow these steps to install TWRP on your Xiaomi Poco M2 Reloaded:

  1. Download the latest TWRP image file specific to your device from the official TWRP website.
  2. Copy the downloaded TWRP image file to the folder where you extracted the ADB and Fastboot files.
  3. On your Xiaomi Poco M2 Reloaded, go to the Settings app.
  4. Scroll down and tap on “About phone.”
  5. Tap on the “MIUI Version” entry seven times to enable Developer Options.
  6. Go back to the main settings screen and tap on “Additional settings.”
  7. Scroll down and tap on “Developer options.”
  8. Enable “USB Debugging” if it is not already enabled.
  9. Connect your Xiaomi Poco M2 Reloaded to the computer using a USB cable.
  10. On your computer, navigate to the folder where you extracted the ADB and Fastboot files.
  11. Open a command prompt or terminal window in that folder.
  12. Type the following command to boot your device into Fastboot mode:
adb reboot bootloader
  1. Once in Fastboot mode, type the following command to check if your device is detected:
fastboot devices
  1. If your device is detected, type the following command to flash TWRP:
fastboot flash recovery twrp-image-filename.img

Note: Replace “twrp-image-filename.img” with the actual filename of the TWRP image file you downloaded.

  1. After the flashing process is complete, type the following command to reboot your device:
fastboot reboot

Step 4: Root Xiaomi Poco M2 Reloaded

Now that you have installed TWRP custom recovery, you can proceed to root your Xiaomi Poco M2 Reloaded. Follow these steps:

  1. Download the latest Magisk ZIP file from the official Magisk GitHub repository to your device.
  2. Boot your Xiaomi Poco M2 Reloaded into TWRP recovery mode by turning it off, then pressing and holding the Volume Up and Power buttons simultaneously.
  3. In TWRP, tap on “Install” and navigate to the folder where you downloaded the Magisk ZIP file.
  4. Select the Magisk ZIP file and swipe the “Swipe to Confirm Flash” button to begin the installation.
  5. Wait for the installation to complete.
  6. Once the installation is finished, tap on “Reboot System.”

Congratulations! You have successfully rooted your Xiaomi Poco M2 Reloaded.

Frequently Asked Questions (FAQs)

1. Does rooting my Xiaomi Poco M2 Reloaded void the warranty?

Yes, rooting your Xiaomi Poco M2 Reloaded typically voids the manufacturer’s warranty. Proceed with caution and be aware of the potential consequences.

2. Can I unroot my device after rooting it?

Yes, you can unroot your Xiaomi Poco M2 Reloaded by flashing the stock firmware or using the “Uninstall” option in the Magisk app. However, unrooting may not always reinstate your device’s warranty.

3. Will rooting improve my device’s performance?

Rooting itself does not directly improve your device’s performance. However, by removing bloatware and optimizing system settings, you can potentially enhance your device’s performance.

4. Can I still receive OTA updates after rooting my device?

Rooting your Xiaomi Poco M2 Reloaded may prevent you from receiving OTA (Over-the-Air) updates. However, you can manually install updates by flashing the firmware using TWRP custom recovery.

5. Are there any risks associated with rooting my device?

Rooting your Xiaomi Poco M2 Reloaded carries certain risks, including the potential for data loss, security vulnerabilities, and the possibility of bricking your device if not done correctly. It is crucial to follow instructions carefully and proceed at your own risk.

Conclusion

Rooting your Xiaomi Poco M2 Reloaded can unlock a world of possibilities and customization options. However, it is important to consider the potential risks and consequences before proceeding. By following the step-by-step guide provided in this article, you can safely root your device and enjoy the benefits of a rooted Xiaomi Poco M2 Reloaded. Remember to exercise caution, backup your data, and only install apps from trusted sources to ensure a smooth and secure rooting experience.

FAQs After The Conclusion

1. Can I revert back to the stock ROM after rooting my Xiaomi Poco M2 Reloaded?

Yes, you can revert back to the stock ROM by flashing the original firmware using TWRP custom recovery. Make sure to download the correct firmware for your device model.

2. Does rooting my Xiaomi Poco M2 Reloaded increase the risk of malware?

Rooting itself does not directly increase the risk of malware. However, installing apps from untrusted sources or granting root access to malicious apps can expose your device to security risks. Always exercise caution and only install apps from reputable sources.

3. Will rooting my device affect the battery life?

Rooting itself does not directly affect the battery life of your Xiaomi Poco M2 Reloaded. However, certain root-only apps or modifications can impact battery performance. It is important to optimize your device’s settings and use reputable battery optimization apps.

4. Can I still use banking apps after rooting my device?

Rooting your device can potentially prevent certain banking apps from functioning correctly. This is because many banking apps have security measures in place to detect rooted devices, as they consider them a potential security risk. However, there are workarounds available, such as hiding root access using apps like Magisk Hide.

5. How often should I update the custom ROM on my rooted Xiaomi Poco M2 Reloaded?

The frequency of custom ROM updates depends on the ROM developer and your personal preference. It is recommended to keep an eye on updates and security patches released by the ROM developer and update your ROM accordingly to ensure optimal performance and security.

In conclusion, rooting your Xiaomi Poco M2 Reloaded can provide you with a wide range of customization options and features. However, it is important to understand the potential risks and consequences before proceeding. By following the step-by-step guide and considering the FAQs provided in this article, you can make an informed decision and safely root your Xiaomi Poco M2 Reloaded. Remember to always backup your data, use trusted sources, and proceed with caution to ensure a successful rooting experience.

Related video of How to Root Xiaomi Poco M2 Reloaded

Scroll to Top